| APPLICATION METHODS |
| |
RC-2200 can be sprayed. Apply heavy, uniform coat, over
fasteners, seams, etc. See Inland Application Bulletins
for additional information.
|
| PRODUCT TEMPERATURE |
| |
Product temperature should be at a minimum of 40° F.
|
| APPLICATION TEMPERATURE |
| |
For best results, the temperature of the ambient air and the substrate
should be within a range of 40°-110°F.
|
| SURFACE PREPARATION |
| |
The surface must be free of any moisture, rust scale or soil. Remove any
loose material from cracks or seams with a wire brush or scraper. Oil and
grease should also be removed. In many cases water blast will be sufficient
to prepare the surface.
|
| RC-2200 HANDLING & STORAGE |
| |
RC-2200 contains a blend of solvents which is considered
flammable by D.O.T. and O.S.H.A. standards. It should be used and
stored away from flames in a well-ventilated area.
Avoid prolonged breathing of vapors and prevent contact with eyes.
Read all label information and precautions before using.
|
| RC-2200 TECHNICAL DETAILS |
| |
| Type of Application: | Brush | Trowel | Spray |
| Flash Point: | 81° F. | 81° F. | 101° F. |
| Specific Gravity: | 1.05 | 1.07 | 1.03 |
| Weight (lb/gal) | 8.76 | 8.96 | 8.56 |
| Solids (% by Weight): | 57 ± 1% | 63 ± 1% | 50 ± 1% |
| Solids (% by Volume): | 45 ± 1% | 51 ± 1% | 38 ± 1% |
| Type of Resin: | Synthetic Rubber |
| Color: | White |
| Elongation (ASTM-D-412): | 530% |
| Tensile Strength (ASTM-D-412): | 1780 PSI |
Water Vapor Transmission
Permeance (ASTM-E-96): | 0.148 perms @ 35 mils |
|
The specifications, properties and performance of materials described herein
are based on information believed to be reliable. Product specifications
are subject to change without notice.
