Modified & BUR 10 Year Limited Product Warranty Requirements
The following links and information provide guidance in proper
application methods and document submittal procedures for issuance of
the "Inland Modified & BUR Roof 10 Year Limited Product Warranty". This
warranty is not applicable to residential installations or any
installation under 100 squares in size unless pre-approved in writing
by Inland.
The "Attachment A" form should be used for pre-approval prior to
commencing any project under 100 squares.
Attachment A (pdf)
Preliminary Project Review. Immediately after contract award, a complete and accurate Bid Report must be
submitted to the Inland Warranty Department for approval. This should
include pages 1, 2 and 3 of the Inland Project Profile, with a drawing of
the roof and the following pictures with detailed descriptions:
- Distant shot of entire building.
- Roof height shot of overall project.
- Close-up of horizontal and vertical seams.
- Any unusual flashing or problem areas.
Project Profile (pdf)
A project approval letter must be received from Inland prior to beginning a
Warranted project for Modified Bit & BUR substrates. All Project Review pictures and documents
should be sent to the following address:
Inland Coatings Corporation
Warranty Department
P.O. Box 247
2619 Hwy 6
Adel, IA 50003
For proper application procedures, please refer to Inland
Specification #IMB350M and "General Requirements". We have also
provided a link for basic Spray Equipment Recommendations.
IMB350M Specification (pdf)
General Requirements (pdf)
Spray Equipment Recommendations (pdf)
Round Penetration Detail Drawing (pdf) (Viewable JPG version)
Ridge Cap Detail Drawing (pdf) (Viewable JPG version)
At project completion, please refer to the "Warranty Checklist". This
will ensure that all necessary information and documents are properly
submitted.
Warranty Checklist (pdf)
The following Warranty and Project Forms should be completed and
submitted to the Inland Coating Warranty Department. The product
warranty form must be the original, signed copy.
Modified & BUR 10 Year Limited Product Warranty (pdf)
Project Profile (pdf)
All forms, product invoice copies and documentation should be sent to
the following address:
Inland Coatings Corporation
Warranty Department
P.O. Box 247
Adel, IA 50003
|
